Product Manual A

www.iaexim.com
Operating/Programming
To extend and retract the actuator:
1-Press buttons 2 and 3 to extend actuator
2-Press buttons 1 and 2 to retract actuator
To program presets #1, 2, and 3:
3-Move the actuator to a chosen position
4-Press and hold the #1, 2, or 3 button for 5 seconds
-The LED will flash to indicate the preset has been programmed
5-Repeat steps 3 and 4 twice for three different presets
***The presets can be at any position throughout the stroke of the actuator. They
do not need to be
in order, nor do they need to be programmed in order.***
Optional Features
DIP SWITCH FUNCTION ACTION REASON/EXAMPLES
#1 ON
Operates only when
ignition IS present
The unit will operate only
when the yellow ignition wire
receives +12VDC
If you want to control items when the
ignition is ON.
OFF
Operates only when
ignition is NOT
present.
The unit will operate only
when the yellow ignition wire
is NOT receiving +12VDC
If you wanted to raise/lower your
trunk when the car is OFF.
#2 ON
Auto return to preset
#1 with loss of
ignition.
Auto return to preset
#2 with ignition.
When +12VDC is removed
from the yellow ignition wire,
the actuator will move to
preset #1.
-LED will turn off after
preset is reached.
When the yellow ignition
wire receives +12VDC, the
actuator will move to preset
#2.
-LED will remain on after
preset is reached.
If you want your trunk, running
boards, steering column, etc. to move
automatically when you turn the
ignition ON/OFF.
OFF
Nothing happens with
ignition cycle.
When the key is turned on,
then off, the actuator will
remain at the same location.
If you do not want automatic
movement when you turn the vehicle
on and off.