Product Manual A

Explanation:
This unit features 3 user programmable
presets that are easily accessed via the
push-button display to precisely control
one linear actuator. Linear Actuators can
be used to open trunks, hoods, etc.
When the linear actuator reaches a
position which you would like to preset,
simply press and hold the corresponding
button for 5 seconds. The position is
programmed by the main control unit
and visually indicated by a flashing LED
above the preset.
**Proper wiring is critical to the correct
operation of this unit. Inspect all wiring
to be certain of proper connections, a
good quality ground, and proper fusing.
Also, check wire routing. Keep wires
away from potential damage, such as
moving parts.**
www.iaexim.com
Each Kit Contains the Following Components:
Wiring Diagram