Product Manual

Concentric International
1901 Bell Ave., Suite 18, Des Moines, IA 50315
www.concentricintl.com
Rev. 20161130
Page 3 of 13
LA Dual Control
To move actuator extension tube in and out:
1. Press buttons 2 & 3 at the same time to make the actuator extend.
2. Press buttons 1 & 2 at the same time to make the actuator retract.
To program preset positions 1, 2, and 3:
3. Position the actuator extension tube to where you would like Preset #1 to be located.
4. Press and hold the number 1 button for 5 seconds.
a. The LED will flash to indicate the setting has been learned and stored.
5. Position the actuator extension tube to where you would like Preset #2 to be located.
6. Press and hold the number 2 button for 5 seconds.
a. The LED will flash to indicate the setting has been learned and stored.
7. Position the actuator extension tube to where you would like Preset #3 to be located.
OR
OR
5 seconds
5 seconds
OR