Product Manual

512 Series Seat Assembly and Operating Instructions.docx Page 2 of 4
8-22-17
b. Back seat cushion
i. The back cushion has one slot (circled – Figure 3) and two nutserts (circled
– Figure 3) in it that are used to mount the back cushion to the seat frame
(Figure 4).
ii. This mounting hardware takes a 13mm wrench or socket.
iii. Slide the slot in the seat back onto the tab on the seat frame before installing
the mounting screws.
Figure 3
Figure 4
c. Seat frame back cover plate
i. Slide the top of the back cover plate inside of
the top lip of the seat frame (circled – Figure
5).
ii. There are two screws that hold the bottom
corners of the back cover plate to the bottom
of the seat frame (circled – Figure 5).
Figure 5