Product Manual

Aug ‘11

Arm Rest Kit Instructions for

441

BK Seats

To apply 931

BK Arm Rest Kit to 441

BK Seat:

1. On either side of the backrest, run your finger under the vinyl to locate the

three bolt locations. Mark where the center of each hole is.

2. Using a small center punch or similar tool, pierce the vinyl. NOTE: Be sure

your center punch is running down the center of where the bolt hole

location is.

3. Take one of the bolts and run it through the vinyl to ensure the bolt will run

through it.

4. Install the armrest.

5. Repeat steps 1 through 4 for the opposite side.

PAGE 1
Arm Rest Kit Instructions for 44100BK Seats To apply 93140BK Arm Rest Kit to 44100BK Seat: 1. On either side of the backrest, run your finger under the vinyl to locate the three bolt locations. Mark where the center of each hole is. 2. Using a small center punch or similar tool, pierce the vinyl. NOTE: Be sure your center punch is running down the center of where the bolt hole location is. 3. Take one of the bolts and run it through the vinyl to ensure the bolt will run through it. 4. Install the armrest.