Specifications
Table Of Contents
- ugh015-0100.pdf
- Contents
- Introduction
- Description
- Installation
- Operation
- Maintenance
- Troubleshooting
- Before beginning
- Diagnostics
- Repair
- Checking and replacing fuses
- Resetting overloads
- Replacing the pump overload
- Replacing the motherboard
- Replacing the heater contactor
- Checking thermocouples
- Replacing thermocouples
- Repairing solenoid valves
- Replacing heater elements
- Removing the pump
- 3/4-2 Hp Pump disassembly/assembly
- 3-7.5 Hp Pump disassembly/assembly
- Appendix
- Parts/Diagrams
Thermolator TW-1 and TW-2 UGH015/0100
4-4 OPERATION
MOUNTING THE
TW-2 C
ONTROL
IN A
REMOTE
LOCATION
CAUTION: Improper use of the swiveling
control panel can damage the unit.
● Do not use the control panel handles or
control cables to move the Thermolator. The
handles are designed only for orientation of
the control panel.
● Do not mount the detached TW-2 control
panel to a hot surface.
The TW-2 control panel can be mounted up to 50 feet from
the unit, using a remote control cable and the magnetic back
on the back of the panel.
Do not stretch the cable. The cable is available in various
lengths so that you can order the appropriate cable for your
installation.
To detach the TW-2 control panel:
Grasp the black control panel
handles and pull upward.
Use the magnetic back to mount
the control panel in the remote
location. Connect the remote-
mounted control to the unit with
the cable provided.