Technical information

1Page
DD01T0213703
14.10.02
– SELECTING THE SHEETS –
Select the correct sheet depending on the cabinet and the speed driver to be replaced :
Speed
driver /
cabinet
KIT PX 85
PY–PZ
85
PZ
86–87–88
P900
P900+
CN900++ MPA XE MPA XN
MPA–II
XN–YN
DANFOSS
40E7070x
or
40E7090x
Add an
interface
board
20E65501
and con-
sult sheet
2 (page
6)
Sheet 1
(page 4)
Sheet 2
(page 6)
KEB 54
AOIP ACF215
40E7090x X
Sheet 3
(page 8)
Sheet 4
(page 10)
KEB 56 40E7090x X X
Sheet 5
(page 12)
ATV 15 40E7080x X X
Sheet 6
(page 14)
Sheet 7
(page 16)
Sheet 8
(page 17)
Sheet 9
(page 18)
ATV 16 40E6680x X X X
Sheet 7
(page 16)
Sheet 11
(page 20)
Sheet 8
(page 17)
Sheet 9
(page 18)
Sheet 10
(page 19)
X : If the speed drivers are replacements of the original speed driver. Consult the chapter for the original speed
driver.
If you are replacing an ATV 16, before replacing the speed driver, note the value of parameters : Acc, dEc, HSP,
UFr, ItH, FrS and tFr. The values will be used as a basis for setting the ATV 58. If it is not possible to read the
parameters, consult the tables on page 22.
In all cases, the motor must have a triangle connection.
Kits’ contents :
– DANFOSS 380 or 415 Volts three–phased –> ATV 58 : Ref. 40 E 707 0x
As well as the speed driver and an adaptor panel, this Kit contains fuses, fuse holders, a piece of DIN
rail, a single–phased transformer 230/400 +/– 15 V –> 230 V and a double pole double throw relay that
is not always useful.
– KEB 54, KEB 56 or DANFOSS 220 V single–phased –> ATV 58 : Ref. 40 E 709 0x
As well as the speed driver and an adaptor panel, this Kit contains a double pole double throw relay
that is not always useful.
– ATV 15 –> ATV 58 : Ref. 40 E 708 0x
As well as the speed driver and an adaptor panel, this Kit contains a double pole double throw relay
that is not always useful. The panel is installed in the place of the ATV 15 so that the ATV58 can be
installed without any extra boring.
– ATV 16 –> ATV 58 : Ref. 40 E 668 0x
As well as the speed driver and an adaptor panel, this Kit contains a double pole double throw relay
that is not always useful. The panel is installed in the place of the ATV 16 so that the ATV58 can be
installed without any extra boring.