User guide

3.2 Safety system
The granulator has a safety system for to prevent access
to dangerous components during operation.
The granulator has knives that rotate at high speed.
The granulator is therefore equipped with a safety
system to avoid personal injury.
The safety system must not be changed or
modified under any circumstances.
If the safety system of the granulator is
changed or modified, the machine can be
dangerous to use, presenting a serious risk
of personal injury.
All care and maintenance to the safety system
of the granulator must be carried out by
personnel with the necessary knowledge.
If the safety system of the granulator is modi-
fied in any way, ConairÕs responsibility under
the Machinery Directive ceases to apply.
Only Conair spare parts must be used to replace
safety components.
Emergency stop
The granulator has an emergency stop on the control panel.
It can also be equipped with extra emergency stops.
The emergency stop is activated by pressing the button.
Reset by turning the button in the direction of the arrow
(counterclockwise).
Safety switch
The granulator has safety switches of the
position switch type with breaking key:
Ð If a secured position is changed or
when a breaking key is undone,
it will break the current and the granu-
lator stops.
This granulator has 2 safety switches:
1 at the hopper and 1 at the screen box
Check the wiring diagram (chapter 9) to
see how many safety switches the granula-
tor is equipped with.
CF Series Granulators UGG003/0398
4 SAFETY SYSTEM
Emergency stop
Safety switch
Main switch
Emergency
stop
Main switch
Breaking key
Safety switch
Breaking key
Safety switch