Specifications

Appendix l AA-31
Troubleshooting
Alarms
All DM-II alarms are passive and will not cause the dryer to
shutdown.
The amber light on the stack will be on.
1 Press the Acknowledge Alarm button once to display the alarm message.
Pressing the Acknowledge Alarm button once also changes the alarm LED from
blinking to solid.
2 Find the error message in the diagnostics table of this trou-
bleshooting section.
3 Note that pressing the Acknowledge Alarm button a second time will clear
the alarm.
NOTE: If the condition still exists, or if a subsequent alarm has occurred as a result of the origi-
nal alarm, the alarm will become active again.
1
2
3
4
5
6
7
8
9
Clear
0
Enter
Adjust Setpoint
Acknowledge
Alarm
Start
Stop
Select
Category
Menu
Scroll List
Prev
Next
Auto Start
Dewpoint Control
Set-Back Temp.
Process Blower
Process Heater
Regen. Blower
Regen. Heater
100
Acknowledge
Alarm LED and
Button
✐
✐
NOTE: Pushing the
Acknowledge Alarm
button when there is
no active alarm will
take the user directly
to the Alarm History
list.
Red - The dryer has
stopped/shut down
alarm on the dryer
Amber - possible trouble/
DM-II passive alarm
Green - running properly