Specifications

A ppendix l AA-3
Unpacking the Boxes
The DM-II comes in two or more shipping containers, depending on the options
ordered. The containers should include:
1 Carefully remove the components from their shipping containers.
2 Remove all packing material, protective paper, tape, and plastic. Do not dis-
card installation notice tags. If you bought more than one DM-II, check each for
a tag indicating which drying hopper it was factory-configured to monitor.
See the specifications on the next page to match the drying hopper model with
the part number on the DM-II probe.
3 Carefully inspect all components to make sure no damage occurred during
shipping, and that you have all the necessary hardware.
4 Take a moment to record serial numbers. Also record the drying hopper’s
model number and specifications. The information will be helpful if you ever
need service or parts.
5 You are now ready to begin installation.
Probe cable
DM-II
Probe
Compression
fitting
Adapter plates
and gasket
Coupling