User guide

Operation l 4-53
4
Operation
Scroll Page Descriptions
Cutter Scrolls - Panel
Two scroll increments are available to adjust the cut length. Pressing the Scroll
Size window in the cutter section on the Main Page will toggle between the two
values. Pressing the (+) or (-) buttons in the Cut Length window will increase or
decrease the cut length by the selected scroll size. These values are typically used
to make fine correctional adjustments.
The Scroll Page is used to change these scroll increment setpoints for both the
puller and cutter sections.
To access the Scroll Page:
1
Press the Set Up 1 tab.
2 Press the Scroll sub-tab.
Scroll amounts are the user preferred values.
(continued)