User guide

Using the IO Page

To access the IO Page:

Press the IO tab.

At the top of each drive image is a title to show which motor it operates. The

drives are in the same order inside the electrical enclosure, which can be viewed

through the door window. Drives are mounted on a common backplane.

IO refers to digital inputs and outputs at the drive and at the FM-4 program mod-

ule that is clipped on to the front of the drive. Inputs that are active are shown

with green lights. Outputs that are active are shown with red lights. The IO num-

ber is shown to the left of each indicator. Inputs and outputs that have program

assignments are labeled accordingly at the right of each indicator.

NOTICE: The drive has 4 inputs and 3 outputs. A further 8 inputs and 4 outputs are

available on the FM-4 program module. Please refer to the Control Techniques

drive and FM-4 manuals that came with your machine for additional information.

Also, please refer to the schematics that came with your machine when tracing

and diagnosing issues.

Each drive has an additional input designated as a drive enable (shown using a

yellow light). Actual Drive Enable can be affected by different issues, e.g. if a

fault is active. For that reason one further light (red) shows if the drive is enabled.

Operation l 4-41

Operation