User guide

Configuring the Blow Off Settings

(continued) (Optional)

Blow Amount

Blow Amount is available to blow one or many pieces off the Take Off/Blow Off

Conveyor at once. For example, if the Blow Amount is set to 5 the Blow Off

valve(s) on the conveyor will blow once after 5 pieces have been cut.

To change the Blow Amount setting:

1 Press the Blow Amount window. A numeric pop-up keyboard appears.

2 Key in the new blow amount.

3 Then press “Enter”. The pop-up keyboard is removed.

4 The new blow amount will appear in the Blow Amount window and will

then be active.

Blow Activation

On/Off is used to enable or disable the Blow Off settings.

1 Press the “On/Off” button to toggle the Blow feature on and off. An indica-

tor light next the the “On/Off” button will illuminate when the Blow feature is

activated.

Operation l 4-23

Operation