User guide

Setting the Blade Speed

Sample - Flywheel Mode showing Blades preset (for multiple blades)

Blade Speed shows the RPM of the blade. In some modes it is possible to set the

Blade Speed. In other modes Blade Speed may be viewed only. Press this window

to access the Blade Speed preset.

NOTE: Blade Speed adjustment is an option, on some cutters Blade Speed will be fixed.

To adjust the blade speed:

1 Press the Blade Speed window. A numeric pop-up keyboard appears.

2 Key in the new blade speed.

3 Then press “Enter”. The pop-up keyboard is removed.

4 The new blade speed is now in the Blade Speed window.

Operation l 4-19

Operation