User guide

Using the Cutter Control
Length
The cutter portion has multiple sections. These are grouped into categories.
• Total Counter • Cut Length
• Batch Counter • Blade Speed
• Batch Settings • Blow Settings
Sample - Encoder Mode Sample - Flywheel Mode
Features differ between the various modes. For example, the length in Encoder
Mode can be set by the operator whereas Flywheel Mode (blade spins continuous-
ly) can only show length as a captured value. Captured value is the amount of
material that has passed during each blade rotation, the blade arriving at the cutter
bushing provides the capture. Cut Length can be changed using either the Scroll
or Keyboard Methods in Encoder and Time Modes only.
See Operation Section
entitled, Using the Cutter Control, Setting the Cutter Length, Scroll Method and
Keyboard Methods.
4-14 l Operation