User guide

3-2 l Installation
Unpacking the Boxes
The Conair Medline Combination Puller/Cutter comes fully assembled in a single
crate.
To uncrate the Medline Combination Puller/Cutter:
1 Carefully uncrate the puller/cutter and its components.
2 Remove all packing material, protective paper, tape, and plastic. Compare
contents to the shipping papers to ensure that you have all the parts.
3 Carefully inspect all components to make sure no damage occurred during
shipping. Check all wire terminal connections, bolts, and any other electrical
connections, which may have come loose during shipping.
4 Record serial numbers and specifications in the blanks provided on the back
of the User Guide's title page. This information will be helpful if you ever need
service or parts.
5 You are now ready to begin installation. See Installation Section entitled,
Preparing for Installation.
CAUTION: Lifting
To avoid personal injury or damage to the puller/cutter, lift the puller/ cutter
using a forklift or hoist with straps that have been positioned at the
puller/cutter’s center of gravity.