User guide

6-16 l Troubleshooting

Checking the Servo Amplifier

The servo amplifier is equipped with a digital readout that can be seen through the

viewing window on the electrical enclosure. This display shows amplifier status

and error messages. Refer to the supplier's documentation included with this User

Guide.

Checking the Motor Assembly

1 Open the knife guard.

2 Remove the cutter head by loosening the Trantorque assembly. Refer to the

manufacturer's guide included with this User Guide for information about the

Trantorque assembly.

3 Locate the four (4) bolts holding the motor assembly to the cutter. Remove

them and carefully remove the assembly from the cutter.

NOTE: Make sure you look for servo amplifier messages before you shut off the

power, because fault message will be lost.

Remove

Bolts (4)