User guide

2-8 l Description
MODELS CPC-3-20/CSC-0.25L
Performance characteristics
Extrudate capacity in. {mm} dia. 0.25 {6.35}
Blade drive motor (3000 rpm)
CSC cutter Hp {kW} 2.7 {2.01}
Puller drive motor Hp {kW} 1 (0.75}
Optional Servo drive motor Hp {kW} 2.46 {1.83}
Dimensions in. {mm}
A - Height 71.0 {1803.4}
B - Height to centerline, ±2 {±50.8} 42.0 {1067}
C - Width 45.0 {1143}
D - Depth 27.0 {685.8}
Belt width ±3/8 {±9.5} 3.0 {76.2}
Belt traction length 20.0 {508}
Feed opening 4.0 {102}
Weight lb {kg}
Installed 735 {333}
Shipping 820 {372}
Electrical requirements Full Load Amps
Drive type(Puller) Closed Loop Servo
1.0 Hp 2.46Hp
230V/3 phase/60Hz 19.7 33.6
460V/3 phase/60Hz 10.5 16.8
Cutter Control Red Lion
SPECIFICATION NOTES
Specifications may change without notice. Check with a Conair rep-
resentative for the most current information.
OPTIONS
• Servo drive motor • Stainless steel cabinet
Power OnPower On
EMERGENCY EMERGENCY
STOPSTOP
Cutter
Stop
Cutter
Start
Cutter
Off OnOff On
Manual
Cut
Puller
Stop
Puller
Stop
Puller
Start
C
B
A
D
Specifications: Medline Combination
Puller/Cutter
(continued)
TPES016-1206-REV