User guide

6-14 l Troubleshooting
Product Quality Problems (continued)
Symptom
Length of cut is incorrect.
Possible Cause
Repeatability is wrong.
Encoder, input device problem.
There is a problem with the puller.
Solution
Test for repeatability. See
Troubleshooting Section entitled,
Testing Repeatability. Also see
Operation Section entitled, Tuning
the Cutter if using Red Lion Servo
controls for Repeatability Testing.
Check encoder, input device and
clean. Run repeatability test,
See
Checking the Encoder,
Troubleshooting Section.
Run repeatability test. See
Troubleshooting Section entitled,
Testing Repeatability. Also see
Operation Section entitled, Tuning
the Cutter if using Red Lion Servo
controls for Repeatability Testing.