User guide

Maintenance l 5-9

Checking Grease Locations

For Puller Model 1-12

Lubricate all shafts and grease fittings as needed.

Lubricating Shaft and Fittings

For Puller Model 3-20

You should check the shafts and grease fittings weekly, and

lubricate as needed

Lubricate thread rods and vertical shafts with Never-Seize or an

equivalent lubricant.

Lubricate the vertical shaft drive boxes with a high-temperature

grease, such as Mobil grease 28 or an equivalent.

You can use regular grease on all other locations.

Maintenance

NOTE: Use regular grease for all

locations except thread rods, verti-

cal shafts, and vertical shaft drive

boxes.

For thread rods use FDA silicone or

grease.

Grease Fitting