User guide

Maintenance l 5-7
Inspecting Bushing Retaining System
Check the bush retaining system that secures the cutter bushings. If bushings move
during cutting, cutting blades, and possibly the drive chain, could be damaged.
Checking the Closure Latch
Check the latch and adjust it so the knife guard closes completely. This prevents
false triggering of the safety switch.
Checking Floor Locks
It is best to remove the weight from the casters for optimum stability during cutting
cycles. Check to see if the floor locking mechanism is properly adjusted.
5
Maintenance
Latch
Bushing
Retaining
System