User guide

5-2 l Maintenance
Maintenance Features
The Servo Cutter CSC combo model needs regular, scheduled maintenance for
peak performance. Among the features that require maintenance are:
• Puller belts
• Cutter blades
• Blade mounting hardware
• Cutter bushings
• The knife guard hardware
• Floor locks
• Lubrication
• Optional slide rail system
• Electrical cables, terminals and control lights
• Equipment alignment
Warnings and Cautions
To maintain the best performance of the Combination Puller/Cutter, it must be
cleaned and inspected regularly. Maintenance includes a daily, weekly, quarterly,
and semi-annual (every 6 months) schedule.
Use this maintenance schedule as a guide. You may need to shorten the time of the
maintenance schedule, depending on how often you use the servo cutter, and the
types of material flowing through it. Follow all precautions and warnings when
working on the equipment.
WARNING: Improper Installation, operation, or
servicing may result in equipment damage or
personal injury.
This equipment should only be installed, adjusted, and serviced by qualified
technical personnel who are familiar with the construction, operation, and
potential hazards of this type of machine.
All wiring, disconnects, and fuses should be installed by qualified electrical
technicians in accordance with electrical codes in your region. Always maintain
a safe ground. Do not operate the equipment at power levels other than what is
specified on the machine serial tag and data plate.
(continued)