User guide

Before Starting Combination Unit
Before you start daily operation of the Combination Puller/Cutter, you need to per-
form preventative maintenance.
Necessary maintenance is described in the
Maintenance section of this Users Guide.
Daily maintenance includes:
• Inspecting the puller belt
• Inspecting the cutter blades
• Inspecting the blade mounting hardware
• Making sure the cutter bushings are properly secured
• Inspecting the closure latch on the knife guard
• Checking alignment with extrusion line
• Performing any floor lock adjustments as needed
These items and weekly, monthly, and semi-annual maintenance procedures are
detailed in the Maintenance section of this User Guide.
4-168 l Operation
WARNING: Be sure that power to the puller/cutter is OFF when doing
any maintenance on the puller/cutter. Follow all safety rules when perform-
ing any maintenance on this equipment.
DANGER: Pinch Hazard
Never remove or disable safety devices to sustain production. Operating
without these devices could lead to hazardous conditions that can cause
severe injury. Take all necessary precautions when working around moving
parts to prevent body parts and clothing from being pulled into the machine.