User guide

Puller Operator Control Instructions:
Puller Speed Remote
(Optional)
The optional Puller Speed Remote is used upstream on an extrusion line to correct
puller speed. The increment of change used is set at the Scroll Increment Screen.
See
Operation Section entitled, Puller Operator Control Instructions: Programming Scroll
Increments.
To change puller speed using the Puller Speed Remote:
1
Press the “Up” or “Down arrow buttons located on the right side of the con-
troller to adjust the puller’s speed. Holding down either button will increase or
decrease the puller speed one scroll increment for every second the button is
depressed. The display will show the current puller speed (FPM).
4
Operation
Operation l 4-167