User guide

Puller Operator Control Instructions:
Operator Entered Speed Change
Puller speed can be entered manually by using the Operator Entered Speed Change
Softkey/Softkey 2 and entering the new puller speed with the controller’s numeric
keypad.
To enter a new puller speed:
1
Press the Operator Entered Speed Change Softkey/Softkey 2.
2
Use the control keypad to enter the new puller speed. The display window will
show the new puller speed and the maximum achievable puller speed. To enter
500 FPM, press 5 - 0 - 0 - 0, the controller’s cursor will start at the least significant
decimal point.
3
Press the “Enter” button to confirm the new puller speed. If the maximum
puller speed is exceeded, a message will be displayed. Press the “Enter” button to
return to the previous screen, enter a new puller speed and press either the “Enter”
button or The Return Softkey.
SPEED 500.0 FPM
Lg. Change Ftg.
Enter Spd. 500.0 FPM
Max Is 610.0 Return
The Speed Entered
Can’t Exceed 610.0
4-164 l Operation