User guide

Description l 2-3
2
Description
Limitations
• Because the maximum distance between the puller and cutter is only 6
inches {152.4 mm}, the combination puller/cutter is not suitable for
larger rigid extruded parts.
• The unit is limited by the traction length (the length over which the
extrudate is in contact with the puller belts), which is fixed for partic-
ular models.
• The outer surface of the puller belt material will affect performance.
Softer (low durometer) materials provide good “grab”, but will wear
more quickly, and may tear if the belt jams. Harder (high durometer)
materials last longer, but may not grab the extrudate properly.
Contact Conair for specific belt material recommendations for your product.