User guide

Puller Operator Control Instructions:
Main Screen
MAIN SCREEN
When the puller is first powered up, the following screen will appear after 5 seconds.
The type displayed varies depending on the current puller setting.
The Main Screen has 3 features. The top line displays the current puller speed and is
measured in feet per minute (FPM). The bottom line contains three soft key functions,
softkey1/Scroll Increment, softkey2/Operator Entered Speed Changes and softkey3,
Footage Counter.
Scroll Increment Softkey
Puller speed adjustment can be done by programming the Scroll Increment preset.
Scroll increments can be set for course or fine adjustments.
See Operation Section
entitled, Puller Operator Control Instructions: Programming Scroll Increments.
Operator Entered Speed Change Softkey
Puller speed can be entered manually by the user through this preset.
See Operation
Section entitled, Puller Operator Control Instructions: Entering the Puller Speed.
Footage Counter Softkey
Pressing the Footage Counter Softkey will display the current running footage of the
puller.
See Operation Section entitled, Puller Operator Control Instructions: Footage
Counter.
SPEED 485.0 FPM
Sm. Change Ftg
.
4
Operation
Operation l 4-161