User guide

4
Operation
Operation l 4-157
Cutter Control Instructions: Power
On Time
TIME SOFTKEY
Pressing the soft key located under the word Time on the P/M area screen,
selects the Power-On time screen.
The Power-On time screen displays the total time in hours that the machine has
had the power switched on. This information could be used for scheduling pre-
ventive maintenance. The displayed time can not be reset.
Exit or Prev, Pressing Exit, Prev or the Softkey under the word Exit returns the
display to the Select P/M area screen.
Cycles Softkey
Pressing the soft key located under the word Cycles on the P/M area screen,
selects the machine cycles screen.
The Machine Cycles screen displays the absolute total cuts that the machine has
made since manufacture. This information could be used for scheduling preven-
tive maintenance. The displayed count can not be reset.
Exit or Prev, Pressing Exit, Prev or the Softkey under the word Exit returns the
display to the Select P/M area screen.