User guide

What is the Medical Combination
Puller/Cutter?
The Conair Medline Combination Puller/Cutter pulls small extruded tubing
through sizing and/or cooling tanks and cuts the product to lengths. Since the
puller and cutter are mounted on the same chassis, alignment problems are mini-
mized.
The puller portion's dual servo drive system offers extremely accurate speed
control. Different puller belt materials optimize performance with different types
of extruded materials, or applications.
The cutter portion utilizes a position-controlled servo motor. CSC units achieve
park position repeatability less than 0.1 millisecond.
Typical Applications
Conair Medical Combination Puller/Cutters process extrudable plastics on-line.
While the standard orientation is right-to-left, combination puller/cutters can
also be made with a left-to-right orientation.
See Description Section entitled,
Specifications: Medline Combination Puller/Cutter.
(The illustrations in this
User Guide represent the standard right-to left configuration.)
CSC cutters are limited to a specific range of product sizes based on each unit's
cutting capacity. CSC cutters can operate over a range of speeds (depending on
which options are included.)
See Description Section entitled, Specifications:
Medline Combination Puller/Cutter.
Profile/Bubble/Taper tubing can be processed with the optional touchscreen and
Profile/Bubble/Taper software. With this option, it is recommended to use
sponge belts.
2-2 l Description