User guide

Operation l 4-147
Cutter Control Instructions:
Minimum Measurement
Min Softkey
By pressing the soft key located under the word Min on the second Function Area
Screen, the Minimum allowable measurement value is displayed. The active mode
and the
cuts per minute limit for the model of cutter determines the actual value displayed.
The screen will be displayed for 15 seconds or until any key is pressed, then return
to the second Function Area screen.
CPM Softkey
By pressing the soft key located under the word CPM on the second Function Area
Screen, the calculated cuts per minute are displayed.
The active mode, measurement value, blade speed, number of blades and line
speed may all contribute to determining the actual value displayed. The screen will
be displayed for 15 seconds or until any key is pressed, then return to the second
Function Area screen.
Cutter Control Instructions:
Maintenance Area
MAINT. AREA
Menu function key is used from the first Function Area screen to access the
Maintenance area. There are two menus Maint. and Factory, with access via pass-
word to various sub-menus.
4
Operation