User guide

4-146 l Operation
Cutter Control Instructions: Cut
Mode
Mode Softkey
By pressing the soft key located under the word Mode, the different Cut Modes are
available. There are two Cut Mode screens. The first screen provides choices for
the standard modes available on all cutters.
The second screen displays choices for optional cut modes. The user can toggle
between the two screens with the Next and Prev fixed function keys.
Additional
information on how to access this screen can be found in the operator display
overview in Appendix G of this manual.
Press the Softkey located under the cut mode desired to select that mode. If the
mode is available an acknowledgment will be displayed.
This message will be displayed for 3 seconds or until any key is pressed.
Next or Prev, Pressing Next selects the second Cut Mode Area. Pressing Prev
returns the display to the first Cut Mode Area. Pressing Prev from the first Cut
Mode Area screen returns the display to the Function Area screen.