User guide

Cutter Control Instructions:
Functions Areas
FUNCTION AREAS
Additional information on how to access and navigate these screens can be found
in the operator display overview section of this manual.
Menu fixed function key is used to access the Function Areas from any main
mode screen. There are two Function Area screens. The user can toggle between
the two screens with the Next and Prev fixed function keys.
Next or Prev, Pressing Next selects the second Function Area. Pressing Prev
returns the display to the first Function Area screen. Pressing Prev from the first
Function Area screen returns the display to the active main mode screen.
Menus are a convenient way to access and monitor parameters that do not need to
be altered often, i.e. blade speed, blade count, cut mode, repeatability test, min.
allowable measurement and cuts per minute.
The most frequently used functions for a certain cutting mode are directly available
from the main screen for the active mode. For a guide to screen navigation for any
active mode see the operator display overview section of this manual for that
mode. For information on the Blade and Parts Softkeys see their respective sec-
tions covered earlier in this manual.
4
Operation
Operation l 4-143