User guide

4-136 l Operation
Cutter Control Instructions: Batch
Screen
(continued)
Numeric keys
Key in the batch required and press enter. If you require a batch of 50 parts you
must key in 50 and then press enter.
Enter or Delete?
If the keyed in number is correct press the enter key for it to be accepted and return
to the Main screen. If it is wrong press the delete key and the previous preset will
reappear.
Batch Pre-Alarm Preset Screen
By pressing the soft key located under the word Alarm on the Batch Area Screen,
the preset for the Batch pre-warn Alarm is available.
The number shown is the current alarm preset. A cursor will appear in the least
significant digit. The user has a choice of ways to adjust this number. See entering
the batch preset above. Please note: This value must be less than the batch preset.
Exit or Prev, if no change is required press Exit or Prev to return to the Main
screen.