User guide

Cutter Operator Control Instructions
Main Screen
MAIN SCREEN
There are two types of main screens, length or time measurement and cuts per minute
measurement. The type displayed varies depending on the current cut mode setting.
See the mode operator display overviews.
The Main Screen has seven features. The top line displays the active preset (only
with multi preset option), cut mode, active measurement and the unit of measure. The
bottom line contains three soft key functions, softkey1/Parts, softkey2/cut On/Off and
softkey3, which varies depending on the current cut mode setting.
Active Preset
With the multi-preset option in on-demand modes the active preset value changes
upon batch completion. As the cutter sequences through multiple presets, the operator
always knows which preset is being processed.
Active Measurement
The measurement value displayed will be the active length or time preset or cuts per
minute depending on the active cut mode. It displays the value only when the
machine is started and softkey2 On/Off is on. If the machine is stopped or softkey2
On/Off is off, this counter will be forced to zero.
If a negative symbol is shown to the left of the measurement value, the encoder sig-
nal is reversed, i.e. rotating in the wrong direction. The cutter will not function while
the encoder is going negative. It is possible to correct this by using the encoder direc-
tion function located in the encoder area of the maintenance area. See the mainte-
nance area display overview.
Length, Time or Blade Softkey
This key is mode dependent see the mode operator display overview for the current
cut mode.
On/Off Softkey
Under the active measurement in the center of the bottom line of the display is a soft
key labeled On or Off. Pressing this key while On is displayed will disable the cutter.
Likewise pressing this key while Off is displayed enables the cutter. Pressing the stop
button forces the cut enable off.
Manual cuts can still be made while the cut enable is off.
4
Operation
Operation l 4-131