User guide

Operation l 4-129
4
Operation
Profile/Bubble/Taper Mode -
Gauge Control Page Description
The Gauge Page is not not functional in the current program. However, in future pro-
grams this page will be used to set scroll (increment) values for each section of the
product. There will be adjustment windows for tip and body sections for the puller
velocity and each of the Analog Outputs. Separate Raise and Lower inputs will be
provided for the gauge to control each section individually.
To access the Profile/Bubble/Taper Gauge Control Sub-Page:
1
Press the Set Up 1 tab and then press the Modes sub tab.
2
Select Profile/Bubble/Taper Mode for both the cutter and puller sections.
“Profile” will be displayed at the bottom of each section when properly selected.
3
Press the Main tab.
4
A “Profile Settings” button will now be displayed in the cutter portion’s
length window.
5
Press the “Profile Settings” button to access the Profile/Bubble/Taper
Main Page.
6
Press the Gauge Control tab to access the Profile/Bubble/Taper Gauge
Control Sub-Page.