User guide

Profile/Bubble/Taper Mode -
Digital Outputs Page Description
Setting Output Length and Duration (continued)
Duration
Each Digital Output has a duration. Duration is how long the output remains on.
Distance or time can be used. In the sample output 1 has a duration of 2.0" which
means the air will turn on at 1.0” and stay on for 2.0”. It will then turn off at 3.0”
from the start of the sequence.
The graphical image shows duration as a positional off (distance only). A conversion
from time to distance could be calculated but it would need to factor in all velocity
changes. For this reason duration will not be represented graphically when time is
chosen.
To adjust the duration for each setpoint:
1
Press the Duration window. A pop-up keyboard appears.
2
Enter new length that the air pressure will remain on.
3
Repeat this step for the remainder of digital outputs to be used. If more than
four outputs are used, additional buttons will appear to display what outputs are
available. The buttons will contain text showing additional outputs in groups of
four, “1-4”, “5-8”, “9-12” and “13-16”. Pressing any of these buttons will display
the corresponding outputs.
4-126 l Operation
(continued)