User guide

Profile/Bubble/Taper Mode -
Analog Outputs Page Description
(continued)
Each Analog Output is selectable by using the (+) or (-) buttons found on the left-
side of the Analog Output Page or by using the keyboard method. Each analog chan-
nel is color-coded to match the line color used on the graph portion of the Analog
Outputs Page.
To select a analog channel (keyboard method):
1
Press the Analog Select number. A pop-up keyboard appears.
2
Enter the number of the analog channel to be viewed.
3
Press “Enter”. The pop-up keyboard is removed and the analog channel
selected will be displayed along with its output presets (up to 32).
To enable an analog channel:
1
Press the “Analog” button of the output that is required, a green light will
illuminate when the output is activated. Each “Analog” button is labeled with a
color-coded system to represent the output on the graph portion of the Analog
Output Page.
Operation l 4-121
4
Operation
(continued)