User guide

Profile/Bubble/Taper Mode -
Velocity Page Description
Index (continued)
Velocity View
Profile View
A graph is available on the Velocity Page which shows a velocity waveform that is to
scale or a profile simulation. The graph can be toggled from velocity to profile by
pressing the “Velocity View/Profile View” button.
The graphs include the cut positions as vertical lines going through the product.
These are color-coded to match the colors on the Cut On/Off buttons on the Profile
Page, for the Sequence Length and Additional Cuts 1 and 2. When a cut is enabled
the line is drawn from the top of the graph to the bottom. When the cut is disabled
the line is truncated. In the Profile View example above, two cuts are enabled as
shown by the red and green lines. The third cut shown by the truncated yellow line is
off.
4-110 l Operation
(continued)