User guide

Profile/Bubble/Taper Mode -
Velocity Page Description
The velocity page has a scrollable list of presets for setting profile. Up and down
buttons are used to scroll through the list. There are three values required for every
index section. These are marked Ramp, Level and Velocity.
To access the Profile/Bubble/Taper Velocity Sub-Page:
1 Press the Set Up 1 tab and then press the Modes sub-tab.
2 Select Profile/Bubble/Taper Mode for both the cutter and puller sections.
“Profile” will be displayed at the bottom of each section when properly
selected.
3 Press the Main tab.
4 A “Profile Settings” button will now be displayed in the cutter portion’s
length window.
5 Press the “Profile Settings” button to access the Profile/Bubble/Taper
Main Page.
6 Press the Velocity tab to access the Profile/Bubble/Taper Velocity
Sub-Page.
4-108 l Operation