User guide

Profile/Bubble/Taper Mode -
Profile Page Description
Cutter (continued)
Body Off Cut
This length is used to cut the product while the “Body On/Off” toggle button is
set to “Off”. This value will be ignored when the “Body On/Off” button is set to
“On”. The Body Off Cut length is a user preference.
To activate and change the Body Off Cut length:
1 Press the Body Off Cut window. A pop-up keyboard appears.
2 Enter the distance, in inches, for the cut length.
3 Press “Enter”. The pop-up keyboard is removed.
4 Press the “Body On/Off button to activate or deactivate the cut length. A
green light will illuminate on the “Body On/Off” button when it is activated
All changes to this page will not take effect when the setting is On Line.
See
Operation Section entitled, Cutter, On Line/Off Line.
4-106 l Operation