User guide

Profile/Bubble/Taper Mode -
Profile Page Description
Cutter (continued)
Additional Cuts 1 and 2
These two entries are used to provide two extra cuts within the Sequence (Total)
Length with the capability to turn on or off the cut. Both of these cuts are relative
to the start of the sequence. Color-coding is used to ensure that the preset is cor-
rectly adjusted for a certain cut length.
See Operation section entitled, Velocity
Page Description.
To set Additional Cut lengths:
1 Press the Additional Cuts 1 and/or 2 window. A pop-up keyboard appears.
2 Enter the new additional cut length(s). Ensuring that the cut length(s) are
within the Sequence (Total) Length.
3 Press “Enter”. The pop-up keyboard is removed.
4 The new distance is now displayed in either the Additional Cuts 1 or 2
window.
5 Press the toggle “On/Off” button underneath either cut length to activate
the cut length.
Operation l 4-105
4
Operation