User guide

Profile/Bubble/Taper Mode -
Profile Page Description
(continued)
Cutter
Location Offset
Location Offset is available to adjust and set the physical distance between extrud-
er die and the cutter blade of the Medline Combination Puller/Cutter. This preset
is needed to ensure that all cuts are synchronized with the profiles, bubbles, tapers
within the product.
To set the Location Offset:
1 Measure the distance from the extruder die and the cutter blade.
2 Press the Location Offset window. A pop-up keyboard appears.
3 Enter the distance from the extruder die and the cutter blade.
4 Press “Enter”. The pop-up keyboard is removed.
5 The new distance is now displayed in the Location Offset window.
4-104 l Operation