User guide
Operation l 4-101
4
Operation
Profile/Bubble/Taper Mode -
Profile Page Description
(continued)
Puller
The puller section has similar options that are on the Main Page. See Operation
Section entitled, Main Page Description, for Footage Counter, Remote Scroll and
Belt Gap descriptions.
Velocity (FPM)
The velocity (FPM) set here is used to vary the line speed while the “Body
On/Off is set to “off”.
To change the Body On/Off setting:
1 Press the “Body On/Off “button found at the bottom-right of the Profile
Page, to toggle the setting on and off. A green indicator light will illuminate
when the “Body On/Off” button is set to “On”.
If the “Body On/Off” button is set to “Off”, the puller runs at a fixed speed using
the velocity (FPM) value that is set. This set value may be adjusted using the key-
board or scroll methods.
See Operation Section entitled, Main Page Description,
Changing the Puller Speed, Scroll and Keyboard Methods.
Remotes (digital
potentiometer, laser gauge) can also be used to change the puller speed.
(continued)