User guide

Cuff Page Description (continued)
Cuts
Up to three cuts may be made from one Cuff. Cut 1 cannot be disabled. Cuts 2
and 3 are optional and are generally used for cutting out scrap sections. An option
is also included to count or not count the cut that is made by cuts 2 and 3.
To change and activate cuff cut lengths:
1 Press the Cuts 1, 2 or 3. A pop-up keyboard appears, enter the new cut length
distance. Each cut length is relative to the beginning of a cuff edge.
2 Press “Enter”. The pop-up keyboard is removed. The new cut lengths will
now be displayed.
3 Press the “On/Off” toggle next to Cuts 2 and 3 to activate the cut, a green
light will illuminate to indicate that the cut is activated. Cut 1 can not be
disabled.
4-98 l Operation
(continued)