User guide

Cuff Page Description (continued)
Trigger Settings
Trigger settings are used to define the Cuff shape. A length at a sustained level
must be met in order for the section to be considered a Cuff. Choices for cuff
detection are “Look for Sensor Off” or “Look for Sensor On”.
To change the Look for Sensor input sensor detection logic:
1 Press the “Look for Sensor On/Off” button to toggle the sensor’s input
logic.
The cutter will be able to differentiate between a cuff and a corrugation by their
lengths. Corrugations typically are shorter than Cuffs. The “Greater than Length”
setting is used to set the distance the Trigger Settings sensor will wait until it has
determined that it has detected a cuff.
To set the “Greater than Length” setting:
1 Press the Greater than Length window. A pop-up keyboard appears, enter
the new distance the Trigger setting will wait until it detects a cuff.
2 Press “Enter”. The pop-up keyboard is removed. The new “Greater than
Length” will now be displayed.
4-96 l Operation