User guide

Operation l 4-95

Cuff Page Description

Cuff is a special mode that is used for corrugated products that have a cuff sec-

tion. Cuff Mode can also be used with printed products to synchronize cuts to

marks that are printed on the product upstream of the cutter. The sensor detects

the ink mark (image or text).

See Operation Section entitled, Modes Page

Description

To access the Cuff Mode Sub-Page:

1 Press the Set Up 1 tab and then press the Modes sub-tab.

2 Select Cuff Mode for the cutter section. “Cuff Settings” will be

displayed at the bottom of the cutter section when selected properly.

3 Press the Main Page tab.

4 A “Cuff Settings” button will now be displayed in the cutter portion’s

length window.

5 Press the “Cuff Settings” button to access the Cuff Mode Main Sub-Page.

Operation