User guide

4-94 l Operation
2.75" 14.75" 4.00" 2.75"
0.65"
Encoder Sequence Page (continued)
Description
Setting Sequence Lengths
To activate and change cut lengths:
1 Press the Sequence Amount window. A pop-up keyboard appears, enter the
amount of sequence cuts needed (1-4).
2 Press “Enter”. The pop-up keyboard is removed. All length windows can
be altered, but will only be used if they are selected with the Sequence
Amount.
3 Press the Cuts length window of the cuts to be used. A pop-up keyboard
appears.
4 Press “Enter”. The pop-up keyboard is removed. Cut lengths will now be
produced according to the cut sequence that has been set.
Encoder Sequence Sample with Sequence Amount set to 4