User guide

Operation l 4-83

Operation

Effects of Tuning

Load Sharing

Set Up 2 Page Description

Tuning the Belt Drive (continued)

Load Sharing:

• Threshold - Each drive must exceed the set value before the program begins to

make adjustments.

• Level - Once both drives exceed the Threshold the Level of difference is

checked next. If the difference is great enough the Top Belt must either increase

or decrease ratio.

• Time - Updates to the belt drive will occur at this time interval.

• Step - This setting controls the change that will be made to the Gear Ratio.

• Tolerance - This is the maximum variation that is allowed. Gear Ratio

should vary only slightly when set correctly.

NOTE: All values under “Load Sharing” can be changed by pressing individual windows and

using the keyboard method to alter the value.

See Operation Section entitled Setting the Cutter

Length Scroll and Keyboard Methods.

Results can be viewed in the Effects of Tuning portion of

each section.