User guide

Scale Page Description (continued)
Maximum Speed and Volts
Maximum Speed and Volts settings are used to set the maximum speed of the
puller. The puller can be limited to any speed up to the absolute maximum speed
shown in the FPM Max window. It is not possible to set a speed higher than Set
FPM Max. A separate maximum is available for the Profile/Bubble/Taper Mode,
maximum FPM for this mode is typically less than for other modes.
A processor calculates the maximum speed that the puller can make based on the
Belt Scale that is entered and details it has for the motor. The result is shown as
absolute FPM Max.
4-70 l Operation
(continued)