User guide

Open the knife guard.
Remove the cutter head
by loosening the Trantorque
assembly. Refer to the manufacturer's guide included with
this User Guide for information about the Trantorque
assembly.
Locate the four bolts holding the motor/reducer
assembly to the cutter. Remove them and carefully
remove the assembly from the cutter.
Refer to the Micron installation and maintenance
information included with this User Guide to check and
adjust the motor/reducer assembly.
6-14 TROUBLESHOOTING
CSC Servo Knife Cutters UGE047/1003
CHECKING THE
MOTOR/REDUCER
ASSEMBLY
1
3
2
4